If you are looking for an easy, effective and safe TFR or the best way to wash your vehicle, then you have arrived in the right place. We offer one of the best car care traffic film remover (TFR) products that will give your car a brand-new look without damaging its paintwork.
Traffic film is a pervasive layer of grime that accumulates on vehicles from road oils, mud, grease, and soot. It degrades your car’s appearance and, over time, its paintwork.
Thus, removing this stubborn film is crucial not only to maintain the aesthetic appeal of your vehicle but also to protect its surface from long-term damage.
Traditional cleaning methods can often fall short, requiring significant effort and sometimes failing to remove the film completely, which is why having a reliable TFR cleaner like ours is essential.
A traffic film remover, also known as a TFR, is a type of powerful chemical cleaner that's used directly on the body of vehicles for cleaning purposes. You can use it with a snow foaming bottle through high-power pressure cleaners.
Typically, traffic film remover is a unique concentration of different chemicals which work in combination to achieve a sole purpose - make it ten times easier to remove grime and dirt from the surface of your car. Here at JennyChem, our TRF cleaner is powerful enough to make the dirt removal process even more comfortable for you.
The most significant benefit of using a traffic film remover is that it's way stronger than snow foam, car shampoos, wax, or pH-neutral washes.
It is one of the best ways to sanitise and clean, especially for farm, supermarket, and catering vehicles. It provides sterilised and clean surfaces by removing gunk and other foreign materials. Learn what separates our solution from the rest below!
We offer two different types of traffic film remover to serve our customers best with their pre-wash. It doesn't matter if you have cars with a lot of aluminium work or if they need heavy-duty degreasing work. Using our solution will leave your vehicle looking brand-new.
Our caustic-based traffic film remover is specifically designed for heavy-duty degreasing and cleaning. It is best for industrial fleet vehicles, people who travel a lot, and off-road vehicles. It removes thick gunk, grime, and dirt efficiently and quickly, even from the clutch and engine compartment that tend to hold built-up grease.
Some of the caustic-based TFR available on the market can damage or dull your car’s paintwork. We only use branded and high-end materials in our caustic-based traffic film remover to avoid this.
We also advise our respective customers to get an extra wax layer applied to their vehicles for more protection after getting the vehicle washed with caustic-based traffic film remover.
Our special non-caustic TFR achieves the same performance but it's even safer to use because it doesn't strip wax away from your vehicle like other products available on the market do.
It has a high pH value but is comparatively lower than caustic-based traffic film removers. We recommend it to our customers who are particular about their vehicle or have tanker vehicles that contain more aluminum.
If you are a DIY enthusiast, then you can easily buy a 5-liter bottle or more than five liters of non-caustic TFR to wash your vehicle at home. Using it daily or weekly doesn't harm your vehicle's paint and provides a streak-free shine every time.
There are many ways to use traffic film removers to remove your road grime for car cleaning or truck washing, but the easiest and most common way is using it with a pump sprayer.
For the best results, here are the steps listed below:
If you don't have a pump spray kit, consider buying one if you're more of a DIY person. Additionally, using TFR remover without the necessary precautions can leave some damaging and unwanted results. The following tips will help you to avoid all the potential damages:
With our extensive experience using TFR chemicals, we find it’s advisable to leave the solution on your vehicle for 3-6 minutes before the rinsing process. If you’re looking to go the extra mile, try agitating the TFR cleaner with a wash brush.
Rinsing traffic film remover is more efficient when you use water at high pressure. That’s not to say you’re utterly helpless without a pressure washer. It’s possible to do the job effectively with an everyday bucket and washer. However, you have to be deliberate about rinsing well.
A TFR cleaner can have a high alkaline concentration. In light of that, it’s hugely important to use protective goggles while using it. If you’ll be working in an enclosed area, better to double up with a protective face mask. This way, you can avoid splashback and inhalation.
For instance, if TFR chemical splashes on a bruise, it will sting. However, there’s no reason to worry about severe side effects. Many auto care experts use traffic film remover with zero side effects. As long as you take proper precautions, you’re good to go!
We know you came here looking for the best TFR cleaner, but this is just one of the many professional car cleaning products you have at your disposal. Round out your detailing regimen with all our popular solutions to give your car the care it deserves:
This is truly your one-stop-shop for all things vehicle care and maintenance, so what are you waiting for? Experience the fulfillment of an impeccably detailed car with the help of Jennychem. Order traffic film remover and all the other essentials you need today.